GitHub/cc-mek-scada
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

#134 #104 redstone RTU integration with supervisor unit, waste routing implemented, changed how redstone I/O works (again, should be good now), modbus fixes

Browse Source
This commit is contained in:
Mikayla Fischler
2022-11-30 23:31:14 -05:00
parent 9c27ac7ae6
commit e1d7c7b1c0
17 changed files with 527 additions and 346 deletions
Download Patch File Download Diff File Expand all files Collapse all files

160
scada-common/rsio.lua
View File

@@ -4,6 +4,7 @@
local util = require("scada-common.util")
---@class rsio
local rsio = {}
----------------------
@@ -12,9 +13,10 @@ local rsio = {}
---@alias IO_LVL integer
local IO_LVL = {
DISCONNECT = -1, -- use for RTU session to indicate this RTU is not connected to this port
LOW = 0,
HIGH = 1,
DISCONNECT = -1 -- use for RTU session to indicate this RTU is not connected to this channel
FLOATING = 2 -- use for RTU session to indicate this RTU is connected but not yet read
}
---@alias IO_DIR integer
@@ -31,8 +33,8 @@ local IO_MODE = {
ANALOG_OUT = 3
}
---@alias RS_IO integer
local RS_IO = {
---@alias IO_PORT integer
local IO_PORT = {
-- digital inputs --
-- facility
@@ -48,45 +50,47 @@ local RS_IO = {
F_ALARM = 4, -- active high, facility safety alarm
-- waste
WASTE_PO = 5, -- active low, polonium routing
WASTE_PU = 6, -- active low, plutonium routing
WASTE_AM = 7, -- active low, antimatter routing
WASTE_PU = 5, -- active low, waste -> plutonium -> pellets route
WASTE_PO = 6, -- active low, waste -> polonium route
WASTE_POPL = 7, -- active low, polonium -> pellets route
WASTE_AM = 8, -- active low, polonium -> anti-matter route
-- reactor
R_ALARM = 8, -- active high, reactor safety alarm
R_SCRAMMED = 9, -- active high, if the reactor is scrammed
R_AUTO_SCRAM = 10, -- active high, if the reactor was automatically scrammed
R_ACTIVE = 11, -- active high, if the reactor is active
R_AUTO_CTRL = 12, -- active high, if the reactor burn rate is automatic
R_DMG_CRIT = 13, -- active high, if the reactor damage is critical
R_HIGH_TEMP = 14, -- active high, if the reactor is at a high temperature
R_NO_COOLANT = 15, -- active high, if the reactor has no coolant
R_EXCESS_HC = 16, -- active high, if the reactor has excess heated coolant
R_EXCESS_WS = 17, -- active high, if the reactor has excess waste
R_INSUFF_FUEL = 18, -- active high, if the reactor has insufficent fuel
R_PLC_FAULT = 19, -- active high, if the reactor PLC reports a device access fault
R_PLC_TIMEOUT = 20 -- active high, if the reactor PLC has not been heard from
R_ALARM = 9, -- active high, reactor safety alarm
R_SCRAMMED = 10, -- active high, if the reactor is scrammed
R_AUTO_SCRAM = 11, -- active high, if the reactor was automatically scrammed
R_ACTIVE = 12, -- active high, if the reactor is active
R_AUTO_CTRL = 13, -- active high, if the reactor burn rate is automatic
R_DMG_CRIT = 14, -- active high, if the reactor damage is critical
R_HIGH_TEMP = 15, -- active high, if the reactor is at a high temperature
R_NO_COOLANT = 16, -- active high, if the reactor has no coolant
R_EXCESS_HC = 17, -- active high, if the reactor has excess heated coolant
R_EXCESS_WS = 18, -- active high, if the reactor has excess waste
R_INSUFF_FUEL = 19, -- active high, if the reactor has insufficent fuel
R_PLC_FAULT = 20, -- active high, if the reactor PLC reports a device access fault
R_PLC_TIMEOUT = 21 -- active high, if the reactor PLC has not been heard from
}
rsio.IO_LVL = IO_LVL
rsio.IO_DIR = IO_DIR
rsio.IO_MODE = IO_MODE
rsio.IO = RS_IO
rsio.IO = IO_PORT
-----------------------
-- UTILITY FUNCTIONS --
-----------------------
-- channel to string
---@param channel RS_IO
function rsio.to_string(channel)
-- port to string
---@param port IO_PORT
function rsio.to_string(port)
local names = {
"F_SCRAM",
"R_SCRAM",
"R_ENABLE",
"F_ALARM",
"WASTE_PO",
"WASTE_PU",
"WASTE_PO",
"WASTE_POPL",
"WASTE_AM",
"R_ALARM",
"R_SCRAMMED",
@@ -103,8 +107,8 @@ function rsio.to_string(channel)
"R_PLC_TIMEOUT"
}
if util.is_int(channel) and channel > 0 and channel <= #names then
return names[channel]
if util.is_int(port) and port > 0 and port <= #names then
return names[port]
else
return ""
end
@@ -112,64 +116,69 @@ end
local _B_AND = bit.band
local function _ACTIVE_HIGH(level) return level == IO_LVL.HIGH end
local function _ACTIVE_LOW(level) return level == IO_LVL.LOW end
local function _I_ACTIVE_HIGH(level) return level == IO_LVL.HIGH end
local function _I_ACTIVE_LOW(level) return level == IO_LVL.LOW end
local function _O_ACTIVE_HIGH(active) if active then return IO_LVL.HIGH else return IO_LVL.LOW end end
local function _O_ACTIVE_LOW(active) if active then return IO_LVL.LOW else return IO_LVL.HIGH end end
-- I/O mappings to I/O function and I/O mode
local RS_DIO_MAP = {
-- F_SCRAM
{ _f = _ACTIVE_LOW, mode = IO_DIR.IN },
{ _in = _I_ACTIVE_LOW, _out = _O_ACTIVE_LOW, mode = IO_DIR.IN },
-- R_SCRAM
{ _f = _ACTIVE_LOW, mode = IO_DIR.IN },
{ _in = _I_ACTIVE_LOW, _out = _O_ACTIVE_LOW, mode = IO_DIR.IN },
-- R_ENABLE
{ _f = _ACTIVE_HIGH, mode = IO_DIR.IN },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.IN },
-- F_ALARM
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
-- WASTE_PO
{ _f = _ACTIVE_LOW, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- WASTE_PU
{ _f = _ACTIVE_LOW, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_LOW, _out = _O_ACTIVE_LOW, mode = IO_DIR.OUT },
-- WASTE_PO
{ _in = _I_ACTIVE_LOW, _out = _O_ACTIVE_LOW, mode = IO_DIR.OUT },
-- WASTE_POPL
{ _in = _I_ACTIVE_LOW, _out = _O_ACTIVE_LOW, mode = IO_DIR.OUT },
-- WASTE_AM
{ _f = _ACTIVE_LOW, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_LOW, _out = _O_ACTIVE_LOW, mode = IO_DIR.OUT },
-- R_ALARM
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_SCRAMMED
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_AUTO_SCRAM
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_ACTIVE
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_AUTO_CTRL
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_DMG_CRIT
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_HIGH_TEMP
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_NO_COOLANT
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_EXCESS_HC
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_EXCESS_WS
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_INSUFF_FUEL
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_PLC_FAULT
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT },
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT },
-- R_PLC_TIMEOUT
{ _f = _ACTIVE_HIGH, mode = IO_DIR.OUT }
{ _in = _I_ACTIVE_HIGH, _out = _O_ACTIVE_HIGH, mode = IO_DIR.OUT }
}
-- get the mode of a channel
---@param channel RS_IO
-- get the mode of a port
---@param port IO_PORT
---@return IO_MODE
function rsio.get_io_mode(channel)
function rsio.get_io_mode(port)
local modes = {
IO_MODE.DIGITAL_IN, -- F_SCRAM
IO_MODE.DIGITAL_IN, -- R_SCRAM
IO_MODE.DIGITAL_IN, -- R_ENABLE
IO_MODE.DIGITAL_OUT, -- F_ALARM
IO_MODE.DIGITAL_OUT, -- WASTE_PO
IO_MODE.DIGITAL_OUT, -- WASTE_PU
IO_MODE.DIGITAL_OUT, -- WASTE_PO
IO_MODE.DIGITAL_OUT, -- WASTE_POPL
IO_MODE.DIGITAL_OUT, -- WASTE_AM
IO_MODE.DIGITAL_OUT, -- R_ALARM
IO_MODE.DIGITAL_OUT, -- R_SCRAMMED
@@ -186,8 +195,8 @@ function rsio.get_io_mode(channel)
IO_MODE.DIGITAL_OUT -- R_PLC_TIMEOUT
}
if util.is_int(channel) and channel > 0 and channel <= #modes then
return modes[channel]
if util.is_int(port) and port > 0 and port <= #modes then
return modes[port]
else
return IO_MODE.ANALOG_IN
end
@@ -199,11 +208,11 @@ end
local RS_SIDES = rs.getSides()
-- check if a channel is valid
---@param channel RS_IO
-- check if a port is valid
---@param port IO_PORT
---@return boolean valid
function rsio.is_valid_channel(channel)
return util.is_int(channel) and (channel > 0) and (channel <= RS_IO.R_PLC_TIMEOUT)
function rsio.is_valid_port(port)
return util.is_int(port) and (port > 0) and (port <= IO_PORT.R_PLC_TIMEOUT)
end
-- check if a side is valid
@@ -229,7 +238,7 @@ end
-- DIGITAL I/O --
-----------------
-- get digital IO level reading
-- get digital I/O level reading from a redstone boolean input value
---@param rs_value boolean
---@return IO_LVL
function rsio.digital_read(rs_value)
@@ -240,27 +249,36 @@ function rsio.digital_read(rs_value)
end
end
-- returns the level corresponding to active
---@param channel RS_IO
-- get redstone boolean output value corresponding to a digital I/O level
---@param level IO_LVL
---@return boolean
function rsio.digital_write(channel, level)
if (not util.is_int(channel)) or (channel < RS_IO.F_ALARM) or (channel > RS_IO.R_PLC_TIMEOUT) then
function rsio.digital_write(level)
return level == IO_LVL.HIGH
end
-- returns the level corresponding to active
---@param port IO_PORT
---@param active boolean
---@return IO_LVL|false
function rsio.digital_write_active(port, active)
if (not util.is_int(port)) or (port < IO_PORT.F_ALARM) or (port > IO_PORT.R_PLC_TIMEOUT) then
return false
else
return RS_DIO_MAP[channel]._f(level)
return RS_DIO_MAP[port]._out(active)
end
end
-- returns true if the level corresponds to active
---@param channel RS_IO
---@param port IO_PORT
---@param level IO_LVL
---@return boolean
function rsio.digital_is_active(channel, level)
if (not util.is_int(channel)) or (channel > RS_IO.R_ENABLE) then
return false
---@return boolean|nil
function rsio.digital_is_active(port, level)
if (not util.is_int(port)) or (port > IO_PORT.R_ENABLE) then
return nil
elseif level == IO_LVL.FLOATING or level == IO_LVL.DISCONNECT then
return nil
else
return RS_DIO_MAP[channel]._f(level)
return RS_DIO_MAP[port]._in(level)
end
end