GitHub/cc-scada
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

#378 fixed unit input not being re-shown on RTU configurator

Browse Source
This commit is contained in:
Mikayla Fischler
2023-11-28 18:05:07 -05:00
parent b1f1753a8d
commit 4ec060ba24
2 changed files with 8 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
rtu/configure.lua
View File

@@ -698,6 +698,7 @@ local function config_view(display)
tool_ctl.p_idx.set_max(2)
tool_ctl.p_unit.reposition(44, 4)
tool_ctl.p_unit.enable()
tool_ctl.p_unit.show()
tool_ctl.p_assign_btn.hide(true)
tool_ctl.p_assign_end.hide(true)
tool_ctl.p_desc.reposition(1, 7)
@@ -710,6 +711,7 @@ local function config_view(display)
tool_ctl.p_idx.set_max(3)
tool_ctl.p_unit.reposition(45, 4)
tool_ctl.p_unit.enable()
tool_ctl.p_unit.show()
tool_ctl.p_assign_btn.hide(true)
tool_ctl.p_assign_end.hide(true)
tool_ctl.p_desc.reposition(1, 7)
@@ -719,6 +721,7 @@ local function config_view(display)
tool_ctl.p_prompt.set_value("This SNA is for reactor unit # .")
tool_ctl.p_unit.reposition(31, 4)
tool_ctl.p_unit.enable()
tool_ctl.p_unit.show()
tool_ctl.p_assign_btn.hide(true)
tool_ctl.p_assign_end.hide(true)
tool_ctl.p_desc_ext.set_value("Before adding lots of SNAs: multiply the \"PEAK\" rate on the flow monitor (after connecting at least 1 SNA) by 10 to get the mB/t of waste that they can process. Enough SNAs to provide 2x to 3x of your max burn rate should be a good margin to catch up after night or cloudy weather. Too many devices (such as SNAs) on one RTU can cause lag.")
@@ -732,6 +735,8 @@ local function config_view(display)
tool_ctl.p_idx.redraw()
tool_ctl.p_idx.set_max(4)
tool_ctl.p_unit.reposition(18, 6)
tool_ctl.p_unit.enable()
tool_ctl.p_unit.show()
if tool_ctl.p_assign_btn.get_value() == 1 then
tool_ctl.p_idx.enable()
@@ -754,6 +759,8 @@ local function config_view(display)
tool_ctl.p_idx.redraw()
tool_ctl.p_idx.set_max(99)
tool_ctl.p_unit.reposition(18, 6)
tool_ctl.p_unit.enable()
tool_ctl.p_unit.show()
if tool_ctl.p_assign_btn.get_value() == 1 then tool_ctl.p_unit.disable() else tool_ctl.p_unit.enable() end
tool_ctl.p_desc.reposition(1, 8)
tool_ctl.p_desc.set_value("You can connect more than one environment detector for a particular unit or the facility. In that case, the maximum radiation reading from those assigned to that particular unit or the facility will be used for alarms and display.")