diff --git a/coordinator/configure.lua b/coordinator/configure.lua
index 106335c..080d5aa 100644
--- a/coordinator/configure.lua
+++ b/coordinator/configure.lua
@@ -534,7 +534,7 @@ local function config_view(display)
 
     TextBox{parent=fac_c_3,x=1,y=1,height=2,text="The following facility configuration was fetched from your supervisor computer."}
 
-    local fac_config_list = ListBox{parent=fac_c_3,x=1,y=4,height=9,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local fac_config_list = ListBox{parent=fac_c_3,x=1,y=4,height=9,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     PushButton{parent=fac_c_3,x=1,y=14,text="\x1b Back",callback=function()fac_pane.set_value(1)end,fg_bg=nav_fg_bg,active_fg_bg=btn_act_fg_bg}
     PushButton{parent=fac_c_3,x=44,y=14,text="Next \x1a",callback=function()main_pane.set_value(4)end,fg_bg=nav_fg_bg,active_fg_bg=btn_act_fg_bg}
@@ -553,7 +553,7 @@ local function config_view(display)
     TextBox{parent=mon_cfg,x=1,y=2,height=1,text=" Monitor Configuration",fg_bg=cpair(colors.black,colors.blue)}
 
     TextBox{parent=mon_c_1,x=1,y=1,height=5,text="Your configuration requires the following monitors. The main and flow monitors' heights are dependent on your unit count and cooling setup. If you manually entered the unit count, a * will be shown on potentially inaccurate calculations."}
-    local mon_reqs = ListBox{parent=mon_c_1,x=1,y=7,height=6,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local mon_reqs = ListBox{parent=mon_c_1,x=1,y=7,height=6,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function next_from_reqs()
         -- unassign unit monitors above the unit count
@@ -569,7 +569,7 @@ local function config_view(display)
 
     TextBox{parent=mon_c_2,x=1,y=1,height=5,text="Please configure your monitors below. You can go back to the prior page without losing progress to double check what you need. All of those monitors must be assigned before you can proceed."}
 
-    local mon_list = ListBox{parent=mon_c_2,x=1,y=6,height=7,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local mon_list = ListBox{parent=mon_c_2,x=1,y=6,height=7,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local assign_err = TextBox{parent=mon_c_2,x=8,y=14,height=1,width=35,text="",fg_bg=cpair(colors.red,colors.lightGray),hidden=true}
 
@@ -796,7 +796,7 @@ local function config_view(display)
 
     TextBox{parent=summary,x=1,y=2,height=1,text=" Summary",fg_bg=cpair(colors.black,colors.green)}
 
-    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function back_from_summary()
         if tool_ctl.viewing_config or tool_ctl.importing_legacy then
@@ -895,7 +895,7 @@ local function config_view(display)
 
     TextBox{parent=changelog,x=1,y=2,height=1,text=" Config Change Log",fg_bg=bw_fg_bg}
 
-    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     for _, change in ipairs(changes) do
         TextBox{parent=c_log,text=change[1],height=1,fg_bg=bw_fg_bg}
diff --git a/coordinator/startup.lua b/coordinator/startup.lua
index 4301bac..a16077a 100644
--- a/coordinator/startup.lua
+++ b/coordinator/startup.lua
@@ -22,7 +22,7 @@ local sounder     = require("coordinator.sounder")
 
 local apisessions = require("coordinator.session.apisessions")
 
-local COORDINATOR_VERSION = "v1.2.0"
+local COORDINATOR_VERSION = "v1.2.1"
 
 local println = util.println
 local println_ts = util.println_ts
diff --git a/reactor-plc/configure.lua b/reactor-plc/configure.lua
index fbefb97..62f7d85 100644
--- a/reactor-plc/configure.lua
+++ b/reactor-plc/configure.lua
@@ -441,7 +441,7 @@ local function config_view(display)
 
     TextBox{parent=summary,x=1,y=2,height=1,text=" Summary",fg_bg=cpair(colors.black,colors.green)}
 
-    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function back_from_settings()
         if tool_ctl.viewing_config or tool_ctl.importing_legacy then
@@ -531,7 +531,7 @@ local function config_view(display)
 
     TextBox{parent=changelog,x=1,y=2,height=1,text=" Config Change Log",fg_bg=bw_fg_bg}
 
-    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     for _, change in ipairs(changes) do
         TextBox{parent=c_log,text=change[1],height=1,fg_bg=bw_fg_bg}
diff --git a/reactor-plc/startup.lua b/reactor-plc/startup.lua
index d73037d..e667e46 100644
--- a/reactor-plc/startup.lua
+++ b/reactor-plc/startup.lua
@@ -18,7 +18,7 @@ local plc       = require("reactor-plc.plc")
 local renderer  = require("reactor-plc.renderer")
 local threads   = require("reactor-plc.threads")
 
-local R_PLC_VERSION = "v1.6.10"
+local R_PLC_VERSION = "v1.6.11"
 
 local println = util.println
 local println_ts = util.println_ts
diff --git a/rtu/configure.lua b/rtu/configure.lua
index c1ab9db..d84cdc7 100644
--- a/rtu/configure.lua
+++ b/rtu/configure.lua
@@ -508,7 +508,7 @@ local function config_view(display)
 
     TextBox{parent=summary,x=1,y=2,height=1,text=" Summary",fg_bg=cpair(colors.black,colors.green)}
 
-    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function back_from_settings()
         if tool_ctl.viewing_config or tool_ctl.importing_legacy then
@@ -578,13 +578,13 @@ local function config_view(display)
     tool_ctl.settings_confirm.hide()
 
     TextBox{parent=sum_c_2,x=1,y=1,height=1,text="The following peripherals will be imported:"}
-    local peri_import_list = ListBox{parent=sum_c_2,x=1,y=3,height=10,width=51,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local peri_import_list = ListBox{parent=sum_c_2,x=1,y=3,height=10,width=49,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     PushButton{parent=sum_c_2,x=1,y=14,text="\x1b Back",callback=function()sum_pane.set_value(1)end,fg_bg=nav_fg_bg,active_fg_bg=btn_act_fg_bg}
     PushButton{parent=sum_c_2,x=41,y=14,min_width=9,text="Confirm",callback=function()sum_pane.set_value(3)end,fg_bg=cpair(colors.black,colors.green),active_fg_bg=btn_act_fg_bg}
 
     TextBox{parent=sum_c_3,x=1,y=1,height=1,text="The following redstone entries will be imported:"}
-    local rs_import_list = ListBox{parent=sum_c_3,x=1,y=3,height=10,width=51,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local rs_import_list = ListBox{parent=sum_c_3,x=1,y=3,height=10,width=49,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     PushButton{parent=sum_c_3,x=1,y=14,text="\x1b Back",callback=function()sum_pane.set_value(2)end,fg_bg=nav_fg_bg,active_fg_bg=btn_act_fg_bg}
     PushButton{parent=sum_c_3,x=43,y=14,min_width=7,text="Apply",callback=save_and_continue,fg_bg=cpair(colors.black,colors.green),active_fg_bg=btn_act_fg_bg}
@@ -620,7 +620,7 @@ local function config_view(display)
 
     TextBox{parent=changelog,x=1,y=2,height=1,text=" Config Change Log",fg_bg=bw_fg_bg}
 
-    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     for _, change in ipairs(changes) do
         TextBox{parent=c_log,text=change[1],height=1,fg_bg=bw_fg_bg}
@@ -649,7 +649,7 @@ local function config_view(display)
 
     TextBox{parent=peri_cfg,x=1,y=2,height=1,text=" Peripheral Connections",fg_bg=cpair(colors.black,colors.purple)}
 
-    local peri_list = ListBox{parent=peri_c_1,x=1,y=1,height=12,width=51,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local peri_list = ListBox{parent=peri_c_1,x=1,y=1,height=12,width=49,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function peri_revert()
         tmp_cfg.Peripherals = deep_copy_peri(ini_cfg.Peripherals)
@@ -675,7 +675,7 @@ local function config_view(display)
 
     TextBox{parent=peri_c_2,x=1,y=1,height=1,text="Select one of the below devices to use."}
 
-    tool_ctl.ppm_devs = ListBox{parent=peri_c_2,x=1,y=3,height=10,width=51,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    tool_ctl.ppm_devs = ListBox{parent=peri_c_2,x=1,y=3,height=10,width=49,scroll_height=1000,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     PushButton{parent=peri_c_2,x=1,y=14,text="\x1b Back",callback=function()peri_pane.set_value(1)end,fg_bg=nav_fg_bg,active_fg_bg=btn_act_fg_bg}
     PushButton{parent=peri_c_2,x=8,y=14,min_width=10,text="Manual +",callback=function()peri_pane.set_value(3)end,fg_bg=cpair(colors.black,colors.orange),active_fg_bg=btn_act_fg_bg}
@@ -963,7 +963,7 @@ local function config_view(display)
     TextBox{parent=rs_cfg,x=1,y=2,height=1,text=" Redstone Connections",fg_bg=cpair(colors.black,colors.red)}
 
     TextBox{parent=rs_c_1,x=1,y=1,height=1,text=" port          side/color       unit/facility",fg_bg=g_lg_fg_bg}
-    local rs_list = ListBox{parent=rs_c_1,x=1,y=2,height=11,width=51,scroll_height=200,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local rs_list = ListBox{parent=rs_c_1,x=1,y=2,height=11,width=49,scroll_height=200,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function rs_revert()
         tmp_cfg.Redstone = deep_copy_rs(ini_cfg.Redstone)
@@ -992,7 +992,7 @@ local function config_view(display)
 
     TextBox{parent=rs_c_2,x=1,y=1,height=1,text="Select one of the below ports to use."}
 
-    local rs_ports = ListBox{parent=rs_c_2,x=1,y=3,height=10,width=51,scroll_height=200,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local rs_ports = ListBox{parent=rs_c_2,x=1,y=3,height=10,width=49,scroll_height=200,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function new_rs(port)
         if (rsio.get_io_dir(port) == rsio.IO_DIR.IN) then
diff --git a/rtu/startup.lua b/rtu/startup.lua
index e8e85fc..d58639c 100644
--- a/rtu/startup.lua
+++ b/rtu/startup.lua
@@ -31,7 +31,7 @@ local sna_rtu      = require("rtu.dev.sna_rtu")
 local sps_rtu      = require("rtu.dev.sps_rtu")
 local turbinev_rtu = require("rtu.dev.turbinev_rtu")
 
-local RTU_VERSION = "v1.7.12"
+local RTU_VERSION = "v1.7.13"
 
 local RTU_UNIT_TYPE = types.RTU_UNIT_TYPE
 local RTU_UNIT_HW_STATE = databus.RTU_UNIT_HW_STATE
diff --git a/supervisor/configure.lua b/supervisor/configure.lua
index b8c4e00..357f733 100644
--- a/supervisor/configure.lua
+++ b/supervisor/configure.lua
@@ -739,7 +739,7 @@ local function config_view(display)
 
     TextBox{parent=summary,x=1,y=2,height=1,text=" Summary",fg_bg=cpair(colors.black,colors.green)}
 
-    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local setting_list = ListBox{parent=sum_c_1,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     local function back_from_settings()
         if tool_ctl.viewing_config or tool_ctl.importing_legacy then
@@ -844,7 +844,7 @@ local function config_view(display)
 
     TextBox{parent=changelog,x=1,y=2,height=1,text=" Config Change Log",fg_bg=bw_fg_bg}
 
-    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=51,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
+    local c_log = ListBox{parent=cl,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}
 
     for _, change in ipairs(changes) do
         TextBox{parent=c_log,text=change[1],height=1,fg_bg=bw_fg_bg}
diff --git a/supervisor/startup.lua b/supervisor/startup.lua
index a983ee4..080e318 100644
--- a/supervisor/startup.lua
+++ b/supervisor/startup.lua
@@ -21,7 +21,7 @@ local supervisor = require("supervisor.supervisor")
 
 local svsessions = require("supervisor.session.svsessions")
 
-local SUPERVISOR_VERSION = "v1.2.6"
+local SUPERVISOR_VERSION = "v1.2.7"
 
 local println = util.println
 local println_ts = util.println_ts